How To Get Water Out Of Charging Port

Posted on By Skye Skinner
How uk

How to Get Water Out of Charging Port: 7 Tricks That Work Learn how to safely dry your Android’s charging port and your iPhone’s Lightning port Oh no! Your phone is wet! What should you do? The most reliable way to get water out of a charging port is to turn off your phone and allow it to air dry completely.

  • Turn off your phone immediately and dry it off with a lint-free cloth.
  • Allow the charging port to air dry in a well-ventilated area for at least 5 hours.
  • To get excess water out of your phone, gently tap it against your hand with the charging port facing down, so water can drip out.
  • Avoid using rice to speed along the process. Instead, place the phone in a room with a fan, and/or place silica packets near the charging port.
  1. 1 Turn off your phone right away. No matter how water resistant your phone is, power it down immediately when it gets wet. Don’t be tempted to turn your phone back on until you’ve thoroughly dried the charging port, headphone jack, and other components.
    • If there is anything plugged into your phone when the charging port is wet, such as a charging cable or battery-extending case, remove that as well.
    • If your entire phone is wet (not just the charging port),, SIM card, and any external memory cards. If you’re using an Android with a removable battery, remove that too.
  2. 2 Use a lint-free towel to dry all visible water. Wipe every part of the phone or tablet with a clean, dry, lint-free towel. Microfiber is a great material for this, as it’s highly absorbent and dries quickly. Continue wiping until you’ve that you can. Advertisement
  3. 3 Gently tap your phone against your hand with the charging port facing down. Make sure the charging port is facing down before you tap the phone on your hand—if the port is facing up, water can run deeper into your phone. Continue tapping your phone on your hand until you’re sure all excess water has dripped out.
  4. 4 Allow the phone air dry in a well-ventilated area. The best way to get water out of the charging port is to let it evaporate naturally. Air circulation will dry the port faster, so let the phone dry in a room with fans, a dehumidifier, or any other moving air source.
    • If you don’t have a fan, you can also try drying the charging port near an electrical appliance that has an exhaust vent, such as behind your computer or TV. Just avoid very hot airflow—never use a blow dryer or place the phone too close to a heater.
    • Keep the charging port facing down while your phone dries, if possible.
  5. 5 Allow the phone to dry for at least 5 hours before turning it back on. Apple recommends allowing your phone to dry for 5 hours before turning it back on or connecting a charging cable to the Lightning port. The recommendations for Android models vary, but waiting at least 5 hours should be long enough for the charging port in any phone to completely dry.
    • Don’t turn your phone on any sooner to avoid damaging your phone.
    • Once the charging port has dried long enough, turn on the phone and watch for a “Liquid Detected” alert. If you see this alert, turn off the phone again, and wait another few hours for it to dry.
    • Do not select to allow your wet phone to charge because this will damage your phone.
    • If your phone was submerged, there may be more water that you can’t see. Continue drying the phone for 24-48 hours for stubborn cases.
  6. 6 Speed up the drying process. If there is still water in the charging port, there are a few other tricks you can try:
    • If the phone is taking too long to dry, around the base of your phone to absorb excess moisture. You can also place the phone in a sealable bag with a few silica packets (after letting the phone air dry) to absorb more moisture.
    • Use a can of compressed air to blow out remaining water from the charging port. Spray in gentle, short bursts, and only once or twice, from several inches away.

    7. Advertisement

  1. 1 Don’t place your phone in direct sunlight to dry. It’s okay to dry your phone outside in warm weather, but avoid exposing it to extreme temperatures. Putting your phone in direct sunlight can cause it to overheat and cause more damage.
  2. 2 Don’t put your phone in rice. Even if the water in your charging port is hard to remove, putting your phone in rice will not speed up the drying process. Plus, the dust from the rice or particles from the rice could get into the charging port and other openings and cause damage.
    • Instead, use silica gel packets. The loose silica particles are contained in a bag, which prevents tiny pieces of the substance from getting inside your phone and damaging it.
  3. 3 Don’t insert any foreign objects into the charging port. Putting anything inside your phone’s charging port is a bad idea because you could push the moisture further in. Cotton swabs, toothpicks, and paper towels can all damage your charging port.
  4. 4 Don’t use a hair dryer. The heat of a blow dryer can damage the electronics inside of your iPhone or Android. If there’s still a lot of water in the charging port after using our drying tricks, you can gently blow into the port with your mouth—just don’t spit in the port by accident! You can also use gentle bursts of compressed air.

    5. Advertisement

  1. There are some signs that your phone has been wet too long and has, If, after removing water from the charging port, your phone exhibits any of the following signs, it’s best to turn to a professional for repair:
    • Visible corrosion on the charging port.
    • Your phone doesn’t power on or the phone powers on, but the screen stays black.
    • Your phone is getting hot easily indicates that the battery may have gotten water damage.
    • The speakers sound weird, like one may not work and the other does.
    • A foggy screen that,
    • Your phone says “No SIM Card” even if there is one inserted.

Question Will my device start charging again after the water has dried? If your device hasn’t sustained any significant hardware damage from the water, it will likely start charging again once it’s dried. Make sure you wait until it’s completely dried before plugging it back in though, to avoid further damage. It’s best to wait a few days for it to completely dry.

Ask a Question Advertisement Written by: wikiHow Technology Writer This article was co-authored by wikiHow staff writer,, Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field.

  • Co-authors: 2
  • Updated: March 28, 2023
  • Views: 34,089

Categories:

Thanks to all authors for creating a page that has been read 34,089 times. : How to Get Water Out of Charging Port: 7 Tricks That Work

Will the water in my charging port go away?

If your iPhone or Lightning accessory is wet – Unplug all cables or accessories. Don’t plug them in again until they’re completely dry. To dry your iPhone:

  1. Tap your iPhone gently against your hand with the Lightning connector facing down to remove excess liquid. Leave your iPhone in a dry area with some airflow.
  2. After at least 30 minutes, try charging with a Lightning cable or connecting a Lightning accessory.
  3. If you see the alert again, there is still liquid in the Lightning port or under the pins of your Lightning cable. Leave your iPhone in a dry area with some airflow for up to a day. You can try again to charge or connect a Lightning accessory throughout this period. It might take up to 24 hours to fully dry.

Here are a few things not to do:

  • Don’t dry your iPhone using an external heat source or compressed air.
  • Don’t insert a foreign object, such as a cotton swab or a paper towel, into the Lightning connector.
  • Don’t put your iPhone in a bag of rice. Doing so could allow small particles of rice to damage your iPhone.

How long does it take a charging port to dry?

Tap-tap your phone firmly several times to eject any remaining water from the charging port. Put your phone inside a sock and slowly blow cool air into it for about three hours. Your phone is dry and good to go.

How long does it take for the moisture notification to go away?

Let the device air dry for at least 24 hours before turning it on again or plugging it into power, or else further damage may occur.

How do I get moisture out of my phone?

A) Leave Your Phone to Evaporate. If you’re on a typical warm day, put your phone by the window to catalyze the drying process. If the outer part of the phone is wet, you can use a microfiber cloth or some paper towels to clean it before you put it where it can dry naturally.

Can I use a hair dryer to dry my iPhone charging port?

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question. Can I use my hair dryer to clean the charging port of my phone? There seems to be some debris collected around it and it’s not charging properly Posted on Apr 6, 2023 10:07 PM 2 replies Apr 6, 2023 10:14 PM in response to AnnaGabriel I would not recommend that. Apr 6, 2023 10:20 PM in response to AnnaGabriel I wouldn’t recommend using a hair dryer to clean out the charging port. This is because the hair dryer will introduce heat into the charging port and that is not a good combination. You can try to dislodge any visible debris using a toothpick, but you must do so very carefully as the charging point is easily susceptible to damage.

  1. Some sites recommend wrapping a toothpick in cotton, but this can potentially add to the debris in the port, so we suggest sticking to the toothpick.
  2. Very gently, insert the toothpick loosely and move it from side to side to see if it picks up any immediate debris.
  3. Don’t put pressure on it at this point.

If you notice debris on the toothpick, wipe it off with a dry cloth or use a fresh toothpick to continue. Continue to try plugging in the phone between movements to see if you’ve fixed the problem. Axel F. iPhone charging port

How do you dry a charging thing?

Here’s how to dry out your phone charging port: –

  • Don’t grab the rice. Rice can potentially become lodged in your phone’s charging port or headphone jack, which can be extremely difficult to dislodge as it swells when exposed to liquid.
  • Leave your device in a dry area for at least an hour with the charging port facing down. This will allow airflow into the port and force excess water to drip out on its own.
  • If you suspect your USB-C or Lightning cable is also wet, store it in a dry place where air can reach it for an hour as well.

Can I charge my phone with liquid in the port?

First Steps – Before undertaking any of the more time consuming solutions below, these are a few fundamentals to get you started.

If the issue persists, try a different charger or accessory. A cable can fail in a way that might trigger this pop up.Restart your phone. This could remove the alert if it’s falsely appearing, or won’t clear even though the port is now dry.Resist the urge to override the alert. Charging when liquid is present in the port could do damage that is much more difficult to repair. It could result in being unable to power your phone on.

Contrary to popular belief, rice doesn’t actually help to dry out electronics, In addition to its ineffectiveness, it also has a tendency of making its way into small crevices like headphone jacks and other ports. So skip the rice and as stick with patience.

Can I use a hairdryer to dry my phone?

Wet Phone? How To Dry Out Your Phone and Waterproof It July 3, 2012 — – intro: We humans can’t get enough water during the summer, but for our gadgets, on the other hand, there may not be a bigger enemy. Sadly, you may already know what we mean if you’ve landed at this article.

  • Maybe your phone fell in the pool.
  • Maybe it fell in the toilet, or maybe someone spilled a large glass of water on the dinner table.
  • Whatever it is, we’re deeply sorry.
  • But not all might be lost.
  • Below we have put together a list of ways to help you resurrect your wet phone and prevent accidents from happening in the future.

All these methods are highly dependent on what sort of phone or gadget you have and how bad the water damage is, but let’s dive right in! quicklist: 1category: Dry Out Tip #1 title: Bowl of Rice url: text: Of course, the first thing you should do with your wet phone is dry it off.

Yes, it sounds obvious, but really dry it off. Get a towel and sop up all the water you can. You can even use a straw. (Okay, don’t do that if you dropped your phone in the toilet.) Do not – we repeat, do not – use a blow dryer; the heat can damage the phone. If you have a phone or a gadget with a cover that comes off, take it off, and take out the battery, the SIM card, and anything else that can easily be removed.

Dry all those things off. The next step might seem a bit crazy, but get a bowl and fill it up with rice. Yep, regular rice from the supermarket. Bury your phone in the bowl and keep it in there for 12 to 24 hours. Rice absorbs moisture and has long been used as a wet-gadget-saving measure.

  1. It doesn’t always work.
  2. While the rice method saved a wet Samsung Android phone of ours, it didn’t do the same for an iPhone that had been dropped in the toilet.
  3. Again, all these methods are highly dependent on what sort of phone or gadget you have and how bad the water damage is.
  4. Media: 16697868caption: related: quicklist: 2category: Dry Out Tip #2title: Bheestie Bags url: text: Silica gel packets are an alternative to rice.

And a company called Bheestie actually sells a special bag that is meant just for saving your wet gadgets. The bag costs $18.14 (or $20.00 at some places) and has special packets inside. They aren’t your typical silica gel packets either – the little packets have a special molecular sieve desiccant formula, according to the company.

  • Open the bag, drop your phone in for 24 hours, and the phone might just come out working again.
  • The bag did work with an old BlackBerry, but we didn’t have an extra iPhone for a test.
  • According to the company, the bag soaks up water 700 percent better than rice.
  • It is available through Amazon.com and other e-tailers.

media: 16697843caption: related: quicklist: 3category: Preventive Tip #1title: Waterproof Case, Lifeproof url: http://www.lifeproof.com/text: Of course, there is no surefire way to know if you will be able to save your phone once it has suffered water damage.

But there are a few ways to make sure your phone doesn’t get damaged in the first place. The first way? Buy a waterproof phone case. One of the best choices is a case from Lifeproof. The $80 case is pricey but it is waterproof down to depths of six feet. It is also shockproof and dust-proof. It’s easy to get on, though there are a few steps first (cleaning it out, etc.).

When we dunked it in a pool we were able to actually take pictures with it underwater. Thankfully, we also made sure the charging port was closed before jumping in the shallow end. There are also other waterproof cases from companies like Outterbox and DryCASE.

media: 16697787caption: related: quicklist: 3category: Preventive Tip #2 title: Liquipel url: text: But there’s a downside to those cases. They are clunky and include a plastic coating on top of your screen, which is why Liquipel is one of the coolest solutions out there. Liquidpel isn’t an actual case but rather a special treatment that can make your phone entirely waterproof.

You send your phone off to the company. They apply a water-safe coating to your phone and send it back to you. The most insane part? When you get the phone back, you won’t be able to tell the difference. It doesn’t add any weight to your phone and it really is hard even to see the coating.

Liquipel says the treatment is more for prevention – in case you spill something on your phone or drop it in a toilet – but we decided to throw it in a pool. When we fished it out it and dried it off it was as if nothing had happened. The treatment is available for the iPhone and a number of Android phones, including the Droid RAZR Maxx and the Galaxy Nexus.

The price depends on how quickly you want the phone turned around and where you live, but it starts at $59.00. media: 16697812caption: related: : Wet Phone? How To Dry Out Your Phone and Waterproof It

Can you dry a wet charger?

Leave your device in a dry place for at least an hour with the charging port facing down. Placing your phone in rice overnight can help remove any moisture.

Is it OK for charger to get wet?

Let it completely and fully dry before plugging it in and it should be ok. If it’s only had a minor splash of rain or water then I wouldn’t worry, but if it’s been saturated/submerged then just ditch it and replace it.

Why won t the moisture detected go away?

My device displays a water drop icon and will not charge | Samsung Ireland If there is water in your device’s USB port or moisture is detected that exceeds a set point, charging will not be supported. This is a safety measure to protect your phone from damage and corrosion. If your device displays a water drop icon which signifies moisture detection, you should power off your device and leave it to dry completely. If the icon does not go away and you continue to experience issues with charging,, Before you try the recommendations below, be sure to check if your device’s software and related apps are updated to the latest version. To update your mobile device’s software, follow these steps: Step 1. Go to Settings > Software update. Step 2. Tap on Download and install. Step 3. Follow the on-screen instructions.

Why does my phone say there is moisture detected?

My device displays a water drop icon and will not charge | Samsung Caribbean If there is water in your device’s USB port or moisture is detected that exceeds a set point, charging will not be supported. This is a safety measure to protect your phone from damage and corrosion. If your device displays a water drop icon which signifies moisture detection, you should power off your device and leave it to dry completely. If the icon does not go away and you continue to experience issues with charging, try clearing your USB cache. Before you try the recommendations below, be sure to check if your device’s software and related apps are updated to the latest version. To update your mobile device’s software, follow these steps: Step 1. Go to Settings > Software update. Step 2. Tap on Download and install. Step 3. Follow the on-screen instructions.

How long does it take for moisture to dry?

TLDR: It takes about 72 hours for areas affected by water damage to dry completely. But, it only takes about an hour for the water to begin causing damage to your home.

Can you use a hairdryer to dry a charging port?

How to Get Water Out of Charging Port: 7 Tricks That Work Learn how to safely dry your Android’s charging port and your iPhone’s Lightning port Oh no! Your phone is wet! What should you do? The most reliable way to get water out of a charging port is to turn off your phone and allow it to air dry completely.

  • Turn off your phone immediately and dry it off with a lint-free cloth.
  • Allow the charging port to air dry in a well-ventilated area for at least 5 hours.
  • To get excess water out of your phone, gently tap it against your hand with the charging port facing down, so water can drip out.
  • Avoid using rice to speed along the process. Instead, place the phone in a room with a fan, and/or place silica packets near the charging port.
  1. 1 Turn off your phone right away. No matter how water resistant your phone is, power it down immediately when it gets wet. Don’t be tempted to turn your phone back on until you’ve thoroughly dried the charging port, headphone jack, and other components.
    • If there is anything plugged into your phone when the charging port is wet, such as a charging cable or battery-extending case, remove that as well.
    • If your entire phone is wet (not just the charging port),, SIM card, and any external memory cards. If you’re using an Android with a removable battery, remove that too.
  2. 2 Use a lint-free towel to dry all visible water. Wipe every part of the phone or tablet with a clean, dry, lint-free towel. Microfiber is a great material for this, as it’s highly absorbent and dries quickly. Continue wiping until you’ve that you can. Advertisement
  3. 3 Gently tap your phone against your hand with the charging port facing down. Make sure the charging port is facing down before you tap the phone on your hand—if the port is facing up, water can run deeper into your phone. Continue tapping your phone on your hand until you’re sure all excess water has dripped out.
  4. 4 Allow the phone air dry in a well-ventilated area. The best way to get water out of the charging port is to let it evaporate naturally. Air circulation will dry the port faster, so let the phone dry in a room with fans, a dehumidifier, or any other moving air source.
    • If you don’t have a fan, you can also try drying the charging port near an electrical appliance that has an exhaust vent, such as behind your computer or TV. Just avoid very hot airflow—never use a blow dryer or place the phone too close to a heater.
    • Keep the charging port facing down while your phone dries, if possible.
  5. 5 Allow the phone to dry for at least 5 hours before turning it back on. Apple recommends allowing your phone to dry for 5 hours before turning it back on or connecting a charging cable to the Lightning port. The recommendations for Android models vary, but waiting at least 5 hours should be long enough for the charging port in any phone to completely dry.
    • Don’t turn your phone on any sooner to avoid damaging your phone.
    • Once the charging port has dried long enough, turn on the phone and watch for a “Liquid Detected” alert. If you see this alert, turn off the phone again, and wait another few hours for it to dry.
    • Do not select to allow your wet phone to charge because this will damage your phone.
    • If your phone was submerged, there may be more water that you can’t see. Continue drying the phone for 24-48 hours for stubborn cases.
  6. 6 Speed up the drying process. If there is still water in the charging port, there are a few other tricks you can try:
    • If the phone is taking too long to dry, around the base of your phone to absorb excess moisture. You can also place the phone in a sealable bag with a few silica packets (after letting the phone air dry) to absorb more moisture.
    • Use a can of compressed air to blow out remaining water from the charging port. Spray in gentle, short bursts, and only once or twice, from several inches away.

    7. Advertisement

  1. 1 Don’t place your phone in direct sunlight to dry. It’s okay to dry your phone outside in warm weather, but avoid exposing it to extreme temperatures. Putting your phone in direct sunlight can cause it to overheat and cause more damage.
  2. 2 Don’t put your phone in rice. Even if the water in your charging port is hard to remove, putting your phone in rice will not speed up the drying process. Plus, the dust from the rice or particles from the rice could get into the charging port and other openings and cause damage.
    • Instead, use silica gel packets. The loose silica particles are contained in a bag, which prevents tiny pieces of the substance from getting inside your phone and damaging it.
  3. 3 Don’t insert any foreign objects into the charging port. Putting anything inside your phone’s charging port is a bad idea because you could push the moisture further in. Cotton swabs, toothpicks, and paper towels can all damage your charging port.
  4. 4 Don’t use a hair dryer. The heat of a blow dryer can damage the electronics inside of your iPhone or Android. If there’s still a lot of water in the charging port after using our drying tricks, you can gently blow into the port with your mouth—just don’t spit in the port by accident! You can also use gentle bursts of compressed air.

    5. Advertisement

  1. There are some signs that your phone has been wet too long and has, If, after removing water from the charging port, your phone exhibits any of the following signs, it’s best to turn to a professional for repair:
    • Visible corrosion on the charging port.
    • Your phone doesn’t power on or the phone powers on, but the screen stays black.
    • Your phone is getting hot easily indicates that the battery may have gotten water damage.
    • The speakers sound weird, like one may not work and the other does.
    • A foggy screen that,
    • Your phone says “No SIM Card” even if there is one inserted.

Question Will my device start charging again after the water has dried? If your device hasn’t sustained any significant hardware damage from the water, it will likely start charging again once it’s dried. Make sure you wait until it’s completely dried before plugging it back in though, to avoid further damage. It’s best to wait a few days for it to completely dry.

Ask a Question Advertisement Written by: wikiHow Technology Writer This article was co-authored by wikiHow staff writer,, Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field.

  • Co-authors: 2
  • Updated: March 28, 2023
  • Views: 34,089

Categories:

Thanks to all authors for creating a page that has been read 34,089 times. : How to Get Water Out of Charging Port: 7 Tricks That Work

Will my charging port dry on its own?

2. Let it Evaporate – Believe it or not, the most effective way to dry your phone is to leave it till the moisture evaporates naturally. Usually, the moisture trapped inside the port should evaporate on its own in a few hours. Make sure you keep your device in an upright position where it’s well-ventilated.

What happens if I charge my phone with water in it?

SOLVED: Is it safe to charge after water damage? “So, is it safe to charge my phone after water damage and after it being in uncooked rice for a few hours” no it is not. You will no get shocked but your phone may further short-circuit and be fully ruined.

First off, ‘‘‘Rice does not work”’. It does not stop corrosion, does not dispalce any liquid inside your phone or underneath components etc., nor will it fix any short-circuit. Keep in mind that liquid damage is the hardest to troubleshoot and to repair. It does not matter if is was exposed for 2 seconds or 2 hours, what matters is where the particulates did the damage.

As with any other liquid immersed device, you need to follow a few steps for proper trouble shooting. Stop to trying to turn it on, charge, sync or otherwise use your phone. This potentially can make a bad situation worse. The very first step I would take is to disassemble your phone.

  1. Use these guides to help you disassemble your phone.
  2. Take a careful and close look at all components and connectors.
  3. Truly assess the damage.
  4. Look for major corrosion, evaluate the pins in the connectors etc,.
  5. Take a look at all connectors as well as cable ends.
  6. You will have to remove all the EMI shields,

If you do not remove the shields, you are not cleaning the board. Once you got the gross contamination cleaned, use 90%+ isopropyl alcohol and clean your parts some more. For a proper cleaning, use It was written for an Apple iPhone 3G but it is still pertinent to your phone as well.

I can not stress the importance of a good cleaning enough, so do it over and over while replacing the alcohol after each cleaning. Do not use compressed air for the cleaning since that can drive liquid as well as corrosion particles into areas that will cause trouble later on. You do not need to leave it to dry for a day.

Isopropyl alcohol in the higher concentration will evaporate quickly and dissipate the water. The importance here is the cleaning, It would of course be best to get it professionally cleaned Do not forget to replace the battery, This is a must and not an option.

What else besides rice dries a phone?

Silica Gel. The best common drying agent is silica gel, which can be found in the pet aisle of your grocery store as ‘crystal’ style cat litter. Couscous. Instant couscous or instant rice are acceptable substitutes for silica.

Can moisture damage your phone?

Severity of Damage If water gets inside, it can stay there for days. Even if your phone is completely dry on the outside, water could be corroding or rusting internal circuitry. How do you know the severity of your cell phone’s water damage? Think about how much water your phone was exposed to before you dried it.

Does the rice trick work?

Here’s the Right Way to Rescue a Soaking Wet Smartphone It fell in the toilet. Your clumsy partner knocked a glass of water onto it. You forgot it was in your pocket when you jumped into the pool. That’s just a few of the hundreds of ways your phone could come into life-threatening contact with liquid.

Fortunately, has become mostly standard on modern phones. New, Samsung Galaxy devices, and Google’s newest Pixel phones all feature some degree of water resistance or waterproofing. How well a phone resists water is measured on an IP (or ) scale. If your phone is rated with a high number, like IP67 or IP68 protection, congratulations, it’s probably going to be fine! But if it’s got a lower rating, or none at all, you should prepare for the worst before you start chilling in the hot tub with your trusty,

So when your phone decides to take a dive, as soon as you’re done freaking out, you’ll probably begin frantically tapping all the buttons, blowing on it, or blasting it with a hair dryer to quickly get rid of all that water. While those are all well-meaning actions, guess what? Totally the wrong approach.

  1. Here’s the right way to rescue your water-damaged smartphone.
  2. First, retrieve it as quickly as possible.
  3. If your phone is still in the bottom of the jacuzzi or the toilet, get it out ASAP.
  4. The longer it’s in the liquid, the greater the likelihood of damage will be.
  5. Once the device is no longer submerged, power it off right away.

Don’t try to press any of the other buttons or load any apps, just switch it off. Remove the case if you have one. If you have a phone with a removable battery, pop the battery out. You want to cut off power in the device as quickly as possible to prevent the possibility of a short circuit.

Most of today’s smartphones don’t have removable batteries, but some older models, or new models built with repairability in mind like the, let you pop the battery out. Do not blow-dry your wet phone or stick it in the oven! Heat can damage the delicate electronics inside. What you should do is give the naked, case-free phone a quick wipe with a clean towel, making sure no water accidentally ends up draining into its charging port, SIM or MicroSD slots, or headphone jack (if your phone ).

If there are traces of water trapped inside cracks or indentations in the case, try carefully and conservatively using compressed air to blow it out. If you don’t have a can of air lying around, you can use your mouth to gently blow it out. Just be careful not to blow the water further inside the phone, or add any of your own spit to the mix.

Next we have a few different options. If you search the internet or ask a friend, a common piece of advice you’ll hear is to stuff your device in a bag of rice. It might work in a pinch, but that method can cause some problems. While rice is absorbent, it’s incapable of collecting all the moisture hidden deep within your phone, so it only serves as a partial fix.

Also, the rice gets mushy and sticky as it absorbs the water, and then you could wind up with gummy bits of rice stuck in your phone’s seams and ports, or dust deep in your device’s crevices. You can wrap the phone loosely in a paper towel before dropping it into the rice, but this is still not your best option.

How long does water stay in charging port?

Water will naturally evaporate from the charging port within approximately 1 to 2 hours.

How long does it take for water to evaporate from a phone charging port?

How long does it take for water to dry in the charging port? – According to the Apple website, it will take 24 hours for a charging port to fully dry. You’ll see a liquid detection notification if your charging phone is wet. This means you shouldn’t try to charge the device to protect it from damage.

  • Wait for the charging port to fully dry before charging your iPhone.
  • Moreover, you can override the liquid detection and charge your phone anyway in case of an emergency.
  • You can do this by using a wireless charger.
  • However, make sure the back of the phone is dry before placing it on top of the wireless charger.

WATCH & LEARN: How to Fix “Charging Not Available” on iPhones.

Can water damage affect charging?

There are a few ways to tell if your phone is water damaged: Sound including calls and music will be distorted. There will be a static sound when connecting or using your headphones. The phone will be unable to charge.