How To Get Liquid Out Of Charging Port

How long does it take for liquid to get out of charging port?

If your iPhone or Lightning accessory is wet – Unplug all cables or accessories. Don’t plug them in again until they’re completely dry. To dry your iPhone:

1. Tap your iPhone gently against your hand with the Lightning connector facing down to remove excess liquid. Leave your iPhone in a dry area with some airflow.
2. After at least 30 minutes, try charging with a Lightning cable or connecting a Lightning accessory.
3. If you see the alert again, there is still liquid in the Lightning port or under the pins of your Lightning cable. Leave your iPhone in a dry area with some airflow for up to a day. You can try again to charge or connect a Lightning accessory throughout this period. It might take up to 24 hours to fully dry.

Here are a few things not to do:

• Don’t dry your iPhone using an external heat source or compressed air.
• Don’t insert a foreign object, such as a cotton swab or a paper towel, into the Lightning connector.
• Don’t put your iPhone in a bag of rice. Doing so could allow small particles of rice to damage your iPhone.

Will liquid in charging port dry?

3. Place Your Phone in Rice Overnight – Placing your phone in rice can help remove moisture, but this isn’t a sure thing. Because rice is water-absorbant, it can help draw out the water from your phone when it gets wet. It is best to do this overnight, as it can take some time, but it certainly is a tried and true method.

However, placing your phone in rice can cause problems, For instance, some rice grains may become lodged in your phone’s charging or AUX port. What’s more, if the rice you’re using is moldy or produces mold while your wet phone is laid within it, you may do more harm than good. Mold can cause hardware damage, possibly making things worse if you’ve already got a wet charging port.

Additionally, a wet USB port often isn’t a severe issue and can often be resolved by leaving your phone out to dry or placing it in front of a fan. But if it is taking some time for your phone’s moisture warning message to go away, the rice method is always a reliable choice on short notice.

Why is my iPhone saying liquid detected?

What to Do If There’s Water – The “Liquid Detected in Lighting Connector” will pop up if there is any form of moisture either on the lightning accessory or inside the charging port. This can be distressing, especially if you’ve unknowingly exposed your iPhone to water, like being in an extremely humid environment.

Will moisture detected go away?

What to Do if You’ve Got Water in the Charging Port – If the water drop icon pops up because you have got moisture in your charging port, you must deal with that to disable the message. You won’t be able to charge using a cable until it has gone.

Disconnect the charger: Once you see the water drop icon, disconnect your charger. It’s best not to try to charge your phone with moisture in it because that can complicate issues. You might be electrocuted or damage your device further. Dry the charging port: After disconnecting your charger, remove the moisture from your charging port. Power off your phone and clean your charging port with a dry cloth, tissue, cotton swab, or a moisture absorber like silica gel.

You can gently stroke the cotton swab inwards to absorb all the moisture in the charging port. Do not be harsh or push too deep because you risk damaging your charging port. Also, do not shake your phone so vigorously to remove the moisture, as this may only damage your device.

• There is a popular myth that putting water-drenched devices in a bowl of rice absorbs moisture.
• That’s not correct; dipping your phone’s charging port in rice will cause more harm than good,
• You can either cover the phone’s port with silica gel sachets or submerge it in rubbing alcohol instead.
• Better still, you can just wait for it to dry naturally with time, as some hours in a well-ventilated area should do the trick.

While your charging port dries, you can use a wireless charger to get enough charge. Once your port dries, plug in your charger, and you’ll find that the moisture warning has cleared.

Can water destroy charging port?

Conclusion – Some of you ask, what if my phone is water resistant? Well, water-resistant smartphones are not waterproof. The metal parts inside the device can still corrode and stop working. You should never charge while the port is dry and the electric flow can cause corrosion to metal pins inside.

Why does my phone say liquid detected when its not wet?

1. Dry the Lightning Connector – Even if you’re holding a dry iPhone in your hands right now, it’s safer to first assume that the “Liquid Detected” alert is accurate. Keep in mind that while iPhones are water-resistant, they are not waterproof. Additionally,,

Therefore, if you dropped your iPhone into the water or went swimming with it recently, it’s highly probable that water got into the charging port. The solution to this is to, In the future, if you do want to bring your iPhone to the pool or a water sports event, you can consider purchasing a waterproof iPhone case that encloses your device entirely.

On the other hand, if you’re sure that your iPhone has been nowhere near water for the past several weeks, the Liquid Detected alert might simply be a glitch. In that case, let’s move on to the other solutions. The next step is to remove and reinsert the Lightning cable into the charging port because the accessory may not have been recognized correctly. If that doesn’t work, you can also try a different Lightning cable. If the alert only pops up when you use a particular cable, you’ll know that the issue was with the cable, not your iPhone. There are lots of cheap, counterfeit Apple cables out there. It’s always best to purchase official or MFi-certified (MFi stands for Made for iPhone) accessories to prevent compatibility issues and the damage they might cause to your iPhone. If debris is stuck in your iPhone’s Lightning port, it may also cause charging issues. You can use the SIM-eject tool to gently and see if this resolves the “Liquid Detected” message. You should not spray cleaning agents directly onto your device or use compressed air when cleaning your iPhone. The next solution is to, The procedure is also known as a force restart. Restarting is an effective solution for nearly all minor technical problems for any device, so it’s definitely worth a try to get rid of the “Liquid Detected” alert. Lastly, it’s best to update your iPhone to the latest iOS if you haven’t. iOS updates carry bug fixes and performance improvements, which may help resolve unnecessary warnings such as this one from popping up. Go to Settings > General > Software Update on your iPhone to check if an update is available.

The “Liquid Detected” alert may provide an Emergency Override option to charge your iPhone, but is it safe to do so?If you’re aware that your iPhone is still wet, you should not attempt to charge it with a wired charger, as it may permanently damage your device.If you absolutely need to charge your device, a safer alternative is to, but remember to dry the back of your iPhone before doing so.

The “Liquid Detected in Lightning Connector” alert aims to protect your device from damage and ensure your safety. It’s certainly a hazard if an iPhone were to continue charging despite a wet Lightning port. Still, the alert may sometimes pop up even if your iPhone isn’t wet.

Is it OK to get water in your charging port?

Step 1: Unplug Your Device and Power It Off Immediately – Water itself won’t damage electronics—generally, it’s the mixture of water and electrical current that causes damage. If you find that there’s liquid in your device’s charging port, the first thing you should do is unplug it and power it off.

How can I dry my charger?

Here’s how to dry out your phone charging port: –

• Don’t grab the rice. Rice can potentially become lodged in your phone’s charging port or headphone jack, which can be extremely difficult to dislodge as it swells when exposed to liquid.
• Leave your device in a dry area for at least an hour with the charging port facing down. This will allow airflow into the port and force excess water to drip out on its own.
• If you suspect your USB-C or Lightning cable is also wet, store it in a dry place where air can reach it for an hour as well.

Should I emergency override liquid detected?

“Emergency Override” on iPhone: What It Means + What to Do Learn what to do if liquid gets in your phone and what “Emergency Override” means Did you know that iPhones have a nifty self-preservation feature that prevents damage to their components? If you ever drop your iPhone in water and then plug it in, you’ll see a “Liquid Detected; Charging Not Available” alert with an “Emergency Override” option.

• To prevent charging from causing damage to the phone, the iPhone alerts you when the Lightning port is wet.
• Use “Emergency Override” in an emergency situation to continue charging the phone, but keep in mind this may damage your phone.
• If you aren’t in an emergency situation, unplug the phone’s accessories, turn it off, and let it air-dry before attempting to plug it in and charge

1. 1 Tap Emergency Override to charge a wet iPhone in an emergency. If your phone detects water in its charging port, it will display a warning if you try to charge the phone. Use the Emergency Override option if you need to charge your iPhone anyway. Just keep in mind that charging while the port is wet can cause corrosion or damage to the phone, so you should only use “Emergency Override” in,
   • If you don’t see the “Emergency Override” option and are in an emergency situation, unplug your phone and plug it back in. The override option should appear
2. 2 Wirelessly charge your phone as a safer alternative. If the Lightning port that charges your iPhone is wet, charging that way will cause permanent damage. You can, however, safely,
   • Only iPhones 8 and newer can charge with a wireless charger.

   Advertisement

3. 3 Wait for your phone to dry if there’s no emergency. If you’re not in an emergency situation and have the time, you can wait for the port to dry. The water will eventually evaporate and once the port is dry, your iPhone will let you charge it.
   • There are a few things you can do to that can hasten the waiting process.

Advertisement

1. 1 Unplug any accessories. Although this isn’t a step that can dry your port, this is a safety concern for yourself and your devices. You don’t want to keep a wet phone connected to your computer or a speaker.
   • You also want to remove any cases from your iPhone.
2. 2 Turn off your iPhone. prevents the possibility of your iPhone short-circuiting and causing more issues in the future.
3. 3 Dry your iPhone. Tap your phone against the palm of your hand with the Lightning Port facing down to get out any excess water that you can.
   • After you’ve removed any water that way, leave your phone off and lay it flat on a table, without the port being blocked off and with a good amount of airflow. Leave it there for a few hours so it can air dry.

Advertisement

Ask a Question Advertisement

• Thanks
• Thanks
• Thanks

Advertisement Written by: wikiHow Technology Writer This article was co-authored by wikiHow staff writer,, Darlene Antonelli is a Technology Writer and Editor for wikiHow. Darlene has experience teaching college courses, writing technology-related articles, and working hands-on in the technology field.

• Co-authors: 4
• Updated: June 3, 2023
• Views: 8,857

Categories:

Thanks to all authors for creating a page that has been read 8,857 times. : “Emergency Override” on iPhone: What It Means + What to Do

How long does it take for a Lightning port to dry?

How long does it take for moisture notification to go away? – Generally speaking, as long as there is moisture detected, the notification won’t go away. It is reckoned that it might take up to 24 hours to dry the lightning port from moisture completely.

1. However, you may be able to speed up the drying process if you leave your iPhone to air dry safely in a well-ventilated space.
2. High humidity levels, exposure to liquids with high water content, or immersion in water can prolong the drying time.
3. It’s crucial to avoid using external heat sources (e.g., hairdryers or microwaves) as they can damage the device.

Easy Fix For Liquid Detection on iPhone

Are iphones waterproof?

Is iPhone 12, iPhone 12 Mini, iPhone 12 Pro & iPhone 12 Pro Max Waterproof? – Apple’s flagship iPhone line-up which includes the iPhone 12, iPhone 12 Mini, iPhone 12 Pro, and iPhone 12 Pro Max are all IP68 certified dust and water-resistant. They can be safely submerged to a depth of 6 meters for up to 30 minutes.

Can water permanently damage charging port?

Submersion in water – If your Android smartphone or iPhone gets submerged in water, it can cause water damage as water invades every opening in the handset. To repair water damage in the phone’s charger port, consider mastering ways to get water out of the charging port.

Is it OK to get water in your charging port?

Step 1: Unplug Your Device and Power It Off Immediately – Water itself won’t damage electronics—generally, it’s the mixture of water and electrical current that causes damage. If you find that there’s liquid in your device’s charging port, the first thing you should do is unplug it and power it off.

Why is my iPhone saying liquid detected when its not wet?

Fix 3: Force Restart iPhone to Fix Liquid Detected iPhone But Not Wet – More often liquid detected in lightning connector not wet alert is due to some glitch in your device when you are sure your device is dry. Just remove this glitch (liquid detected in lightning connector but no water) by force restart.

Step 1: For this, press the volume up button and release quickly. Then press and release the volume down button. Step 2: In the end, press and hold the side button for a few seconds until an Apple logo appears. Once the phone restarts, check your device error of about liquid detection message.

What happens if you override liquid in charging port?

Select Emergency Override – If your iPhone hasn’t been exposed to water or liquid, and there isn’t any dust in the connector, you can safely tap the emergency override button. As mentioned, this button will both dismiss the alert and allow the phone to resume its normal function.