How Much To Install A Log Burner Without A Chimney

Can I install a wood burner if I don’t have a chimney?

Do I need a chimney for a wood burning stove? – Luckily for those living in modern homes, you do not need a chimney to install a wood burning stove. However, it may require more work to fit one than in an existing chimney. This is because you will need to fit a twin wall flue system through the roof or wall of your building.

Are log burners worth installing?

While many people choose a log burner to fulfil a dream of a cosy home, others are much more practical! One aspect that you might have considered in your purchase of a wood burning stove is – will it increase the the value of my home? The truth is, wood burners are a long-term home investment.

Can a wood burning stove be vented through the wall?

Wood Stove Venting Class A chimneys are made of a stainless steel interior and a stainless steel exterior, with either insulation or an air channel in between the outer and inner wall. You will use this when venting through a wall or the ceiling all the way to the roof or above the roof line.

Can I just put a log burner in my fireplace?

A Few Points to Consider Before Installing a Wood Burning Stove – Think carefully before making the decision to install a wood burning stove into an existing fireplace. Suppose you have a beautiful, antique wooden fireplace surround and you wish to retain it? It might not be possible.

Firstly, you must consider the size of the room and the size of a wood burning stove required to heat a room of that size. Once you’ve decided on the size of the stove, you must consider if the fireplace is large enough to accommodate that stove. You will also need to consider whether the chimney of the fireplace will work well with the stove. The fireplace must not only be big enough to accommodate a wood burning stove of the required size. It must also be big enough to allow sufficient space around the stove. Otherwise, the stove will overheat and will heat the walls in the fireplace, rather than the air in the room.

These are the basic requirements for a fireplace into which a wood burning stove can be installed. But there may be other details you need to consider, and these may be best left to a professional.

What are the alternatives to wood burners without chimneys?

What are the alternatives to a wood burning stove? – When it comes to discussing wood burning stove alternatives, there are three main options: bioethanol, gas, and electric. Much like a wood burning stove, they all come with their own pros and cons. Here is what you can expect from these three options.

What is the disadvantage of log burner?

Wood Burning and Multi-Fuel Stoves – In the first place, there are several advantages and disadvantages that both stove types share vis-à-vis oil and gas. The most obvious advantage is price, the primary reason for their reintroduction into the heating market.

Once you get past the overhead cost of purchasing the units, the unit price per mass of fuel is considerably for both wood and multi-fuel stoves, and their owner will quickly recoup the overhead costs associated with their installation. The material used to fuel these stoves is also generally easier to obtain than their oil and gas counterparts, which require refinement before their suitable for domestic use.

Wood, of course, is readily abundant in most temperate climes, and peat has traditionally been readily available as well. In short, the option exists, for both stoves, to obtain their fuel relatively cost free. Common disadvantages for both stoves include extensive maintenance requirements, both stoves must be ventilated properly and regularly cleaned, and both are considerably more likely to ignite large fires than either oil or gas heaters.

Are log burners high maintenance?

Maintenance – Though wood-burning stoves don’t need day to day maintenance, it is recommended that your stove undergoes annual maintenance and service which can be provided by your wood-burning stove supplier. This will include, stripping, inspecting and cleaning the appliance as well as needing to organise having your chimney swept.

How much does it cost to install a wood burning stove UK?

How much does installing a log burner cost, on average? – The average price to install a wood burner ranges from £700 to £3,500. How much you’ll end up paying for the entire thing depends on several factors. These include:

• The type of stove you choose
• The installer who fits your stove
• If your home already has a chimney
• If your chimney needs lining
• If you need a hearth installed

Job	Average Cost
Wood burner with an existing chimney	£700 – £2,000
Wood burner with new fireplace	£1,000 – £3,000
Wood burner with new chimney/flue	£1,500 – £3,500

Can you have a flueless wood burner?

Facebook Twitter Pinterest Email

Home » Frequently Asked Questions » Buyer’s FAQs » Solid Fuel Buyer FAQs » I don’t have a chimney – can I still install a wood burning appliance? Yes. You can install a wood burning stove in properties without a chimney. Stovax has designed a twin-wall flue pipe system – the Stovax Professional XQ™ range – which allows rooms without chimneys to enjoy the benefits of a wood burning stove.

Can I have a wood burning stove in my bedroom?

One of the trends in decoration and wood stoves are the inserts. This model of stoves can be a perfect option to install in your bedroom, as they are stoves that generate less ash, and are much easier to clean. Another option to install in your bedroom, are the classic or modern stoves, of a smaller size.

How much air does a wood stove need?

If your home has a permeability of 5 m3/hm2 or less. –

This is likely to be a post-2008 new build Ventilation is required for any wood burner you install You will need 550mm2 of ventilation per kW of your log burners heat output

For example, a 5kW stove would need 2,750mm2 of ventilation. An 8 kW stove would need 4,400mm2 of ventilation. Here is a reference table to help you out

Log Burner Heat Output (kW)	Ventilation required for home permeability of 5 m3/hm2 or more	Ventilation required for home permeability of 5 m3/hm2 or less
1	None	550mm2
2	None	1100mm2
3	None	1650mm2
4	None	2200mm2
5	None	2750mm2
6	550mm2	3300mm2
7	1100mm2	3850mm2
8	1650mm2	4400mm2
9	2200mm2	4950mm2
10	2750mm2	5500mm2
11	3300mm2	6050mm2
12	3850mm2	6600mm2

Can I legally fit my own log burner?

Do I need planning permission for a log burning stove? – Generally, you don’t need planning permission for a log burner installation. However, there are some caveats. You might think you’re saving yourself a few bob by installing your log burner yourself. But, take heed: it could cost you more. Because: A HETAS install ation comes with a certificate of compliance. Your qualified installer signs the certificate, which gets sent to the council to notify them of the building work. If you fit the stove yourself (or hire a non-HETAS-registered installer to do the work), you must inform your local Building Control department BEFORE you begin the installation.

Strictly speaking, this isn’t the same as planning permission, but you do need to complete this step. After the installation is complete, the Building Control dept will need to inspect the work to ensure that you’ve complied with building regs. This is all at your expense, so what might feel like a low-cost installation can add up.

If you don’t register your self-installation, you can face a fine.

How long do logs last in a burner?

4. Keep my fire burning for hours! – For a fire that burns for longer burn softwood logs together with hardwood logs – making sure they’re all fully seasoned and ready to burn of course! Softwood gets your fire blazing within minutes, and once the hardwood gets going, your fire can burn for up to five hours non-stop! Our seasoned softwood logs start from £2.95 a net / £50 a dumpy bag,

Can I have a TV above a log burner?

Can You Put a TV Above a Log Burner? Yes or No? – While there is nothing to stop you putting a TV above a log burner, it is something that is best avoided. “We would recommend avoiding the placing of delicate electrical equipment in close proximity to highly efficient and thus extremely hot heating products,” state Stovax,

1. Even without the safety concerns of locating electrical cables so close to high temperatures, it could well shorten the lifespan of your television, as well as causing neck ache if located too high on the wall.
2. If you are set on fitting your TV to your chimney breast, consider a log burner alternative.

If not, we have plenty of other chimney breast ideas for you to consider. You might also like to consider other log burner ideas, such as opting for a freestanding log burning stove instead and placing it in one corner of the room, reserving the central position in the space for your television. Consider a freestanding log burner, such as this from Eurostove, and place it away from your television where the flickering flames could affect your viewing pleasure. (Image credit: Eurostove) Bring your dream home to life with expert advice, how-to guides and design inspiration, direct to your inbox.

Natasha is Homebuilding & Renovating’s Associate Editor and has been a member of the team for over two decades. An experienced journalist and renovation expert, she has written for a number of homes titles. She has renovated a terrace and is at the end of the DIY renovation and extension of her Edwardian cottage.

She is now looking for her next project.

Is there a fireplace that does not need a chimney?

Ventless Gas Fireplaces: What You Need to Know Ventless fireplaces, which don’t include a flue or chimney, have been sold in the U.S. since 1980. They’re powered by natural gas, propane, alcohol-based gels, or electricity. Although, the gas and propane options do have some risks since there’s no chimney to expel their gases to the outside.

• Modern ventless fireplace models are strictly regulated by federal agencies and standards groups for safe operation in your home.
• But the debate about their safety does continue.
• In fact, Massachusetts and California, as well as Canada and other countries, have outlawed gas and propane ventless fireplaces.

Here’s what you need to know about ventless options. Ventless fireplaces are typically freestanding units that don’t require a flue or chimney to exhaust combustion air to the outdoors, making them relatively easy to install in any room. Those fueled by natural gas or propane can be positioned anywhere that a supply line can be installed – usually against a wall or inside an existing masonry fireplace.

The latest models also feature automatic ignition, a function that eliminates the need for an outside electrical circuit to spark the pilot light – a handy feature should the electricity ever go out. Gel-fueled units are even more versatile, as they’re completely self-contained (not tethered to a supply line) and light with a match.

Electric units need only a 120-volt outlet nearby, and a dedicated circuit isn’t necessary.

Now’s the time to stock up on paint. Choosing the wrong type of paint finish could mean a do-over that costs twice as much. Slideshow Some trees are more trouble than they’re worth. Before you head to a nursery, see our slideshow. Then, see even more trees readers hate.

Ventless or propane rely on indoor air for combustion, and they exhaust a low level of their combustion gases into the room in which they’re located. A chimney or flue isn’t necessary. The risk to your health is a long-standing and ongoing debate. Proponents suggest that any emissions are negligible, and well within indoor-air quality guidelines as set by various regulatory agencies.

Essentially, these products must meet the general requirements for all combustible heating appliances established in the 2002 version of the National Fire Protection Association’s standards that require ventless fireplaces to have factory-installed carbon monoxide monitors and oxygen detection safety devices (ODS).

These safety devices automatically shut off the fireplace if the carbon monoxide level in the room rises above 25 parts per million, and/or the oxygen level falls below 18% – levels for indoor air quality suggested (but not standardized or regulated) by the U.S.

• Environmental Protection Agency.
• Critics, however, claim that such monitors are unreliable and imprecise, allowing oxygen and carbon monoxide levels to fluctuate out of range before the units shut down, resulting in potential health hazards.
• Ventless fireplaces that use gel canisters or electricity, meanwhile, are above that fray, as they don’t emit anything other than a low amount of heat.

In fact, ventless fireplaces generally are just for aesthetics and supplemental space heating. Those with automatic ignition or that use gel fuel can supply a low level of room heat for short spans of time and during power outages, when electricity isn’t available.

How do you vent a fireplace without a chimney?

Natural Vent – With a natural vent system, you’re still using a similar method as direct venting. Also called a B-vent, a natural vent takes the dangerous fumes of a fireplace and pushes them outside the home through a chimney. If you don’t have a chimney, a natural vent system can also use a pipe venting system, which is typically installed through the roof.

Can you have a chimney without a flue?

Does Your System Have a Flue? – If you have a wood-burning fire, no matter what type of appliance or fireplace it is, your system requires a flue. It may be inside a chimney or a simple flue pipe—but the flue is the duct by which smoke and waste gases exit the home.

• The duct should be sized properly to match the capacity of your fire system and smooth for optimum airflow.
• It should also be properly lined to prevent high heat and toxic fumes from escaping into the home.
• If your fire is a wood-burning one, your chimney needs a flue to work properly.
• If your home is newly acquired, you need to have your chimney inspected by a professional to ensure your flue and chimney system is safe for use.

Even if you’ve owned your home and used your system for years, if you haven’t had it inspected in the last twelve months, it’s important to schedule this appointment now,

How much does a wood burner cost to run UK?

How much to run a log burner? – The Stove Industry Alliance (SIA) estimates that a wood burning stove uses about five logs to heat, compared to an open fire which uses 16. This saving will further increase as fuel prices continue to rise, it adds. Of course, it’s worth pointing out that a log burner won’t heat your entire home so it can’t be considered a direct comparison.

• A log burner will, however, soon heat up the room it’s placed in and residual heat will spread to other rooms too.
• When working out costings, you need to look at the price of wood.
• According to the SIA, the cost of burning kiln dried logs is between £150 to £190 per cubic meter (loose fill).
• The average modern wood burning stove will use around 3.5 cubic metres (m3) of logs in a typical heating season if you have the burner on at evenings and weekends.

Therefore, based on annual wood log usage of between 3-4 cubic meters, the total cost would be approximately £600 to 700 a year.

Can you use a log burner without a flue?

Do I really need a chimney liner for a wood burner? – We’ve seen the reasons in favour of them, but is a chimney liner really necessary for a log burner? After all, there are no laws that specifically say you must have your chimney lined, so long as you meet the requirements of Document J building regulations.

1. Firstly, you need to be aware that a chimney liner is not to be used in place of a suitable chimney – if your chimney is damaged, you will still need to get it repaired even if you have a chimney liner.
2. Related: Are There Building Regulations For A Stove? Secondly, while not mandatory, flue liners are highly recommended by most stove installers, and for good reason.

Along with offering improved safety, cleanliness and efficiency, one of the main benefits of fitting your stove with a flue liner is also better performance, Pretty much all log burners perform better with the help of a flue liner – you will experience less issues with draw, drafts, lighting your fire and keeping a good burn going. Shop Wood Burning Stoves Now

What is the cleanest wood burning stove?

Clean burning new ESSE 175 exceeds incoming Ecodesign requirements by up to 83 per cent without compromising output or burn control – ESSE is launching the cleanest burning stove it has ever built – the contemporary new ESSE 175. Available as two models, with classic feet or a stylish solid base, the ESSE 175 delivers 5kW of heat output and its clean, contemporary design is in keeping with a range of interior design styles – from rustic rural cottages with inglenooks to minimalist free-standing installations.

1. The ESSE 175 uses a three-stage combustion process to extract every last bit of energy from each log burned.
2. Incorporating ESSE’s innovative Particulate Reburn™ Technology the ESSE 175 reignites gases and particles to minimise emissions while maximising heat output.
3. The ESSE 175 also features ESSE’s unique Precision Burn TM technology, delivering precise control of air circulation and the ability to fine tune the combustion rate at every stage of the burn cycle.

The ability to control the intensity of the fire and speed of combustion improves the efficiency of the stove whilst reducing the running costs and emissions. The results of independent testing show the ESSE 175 is the cleanest burning stove ESSE has ever built, surpassing all the latest targets for carbon monoxide (CO), nitrogen oxides (NOx), hydrocarbons and dust particles.

What if I have a fireplace but no chimney?

Natural Vent – With a natural vent system, you’re still using a similar method as direct venting. Also called a B-vent, a natural vent takes the dangerous fumes of a fireplace and pushes them outside the home through a chimney. If you don’t have a chimney, a natural vent system can also use a pipe venting system, which is typically installed through the roof.

Can a log burner be fitted on an internal wall?

Fitting a Wood Burning Stove in a Property with No Chimney – Simon Turner Showrooms in Devon We had customers enquire if fitting a wood burning stove would be possible in their completely refurbished 1960’s bungalow which did not have a chimney. We visited their home to do a free survey to check the property for suitability for installing a flue system for the stove they had selected.

1. Thousands of design & fitting projects completed Qualified Gas Safe registered & HETAS approved engineers We come highly rated by our customers, see our reviews A wood burning stove can be installed with a flue system on an internal wall if the property is suitable.
2. For this project the customers had chosen a position on a flat internal wall of their living room.

Firstly our engineers installed a made-to-size dressed granite hearth in black Brazilian slate. This provides a level base for the stove which is essential to protect the floor from the heat of the stove. Next, the stove was fitted to the slate ready for the flue system to be installed.

The Capital Contour ‘Log Store’ stove was fitted and this has a contemporary design and makes a stunning focal point in a room, as well as providing heat. The customer was very happy with the final result and we are proud to have completed another wood burner fitting job here in Exmouth, Devon. Please have a look over the photos, and of course get in touch if you would like our to come out and visit you.

Stove delivered and ready to install The flue going through the ceiling The cavity below the wood burning area is to store your logs and well as being practical this make a lovely design feature. This stove also has glass panels on each side for all round visibility of the flames The flue was fitted up through the living room ceiling and then through the roof space.

Does a chimney need to be lined for a wood burning stove?

What is a flue liner and why do I need it? – A flue liner is a flexible stainless steel tube that runs up the inside of your chimney, carrying the fumes up inside it instead of straight into your chimney. It is usually recommended you line your chimney to keep it working as safely and efficiently as possible. Flue liners are needed for a number of reasons:

The chimney or flue may have lost integrity over time and may become eroded and rough. This causes frictional resistance that can stop air being drawn up the chimney efficiently. Installing a stainless steel chimney liner is an easy way to repair an unsafe, inefficient, or damaged chimney. Large flues over 200mm might need a smaller flue liner to keep the stove working without losing heat. If the chimney is too cold, smoke won’t rise through the chimney properly. This can leave tar and condensation which eventually bleeds through the wall into the house, leaving stains. NB: tar can still build up in a liner, potentially blocking it. It is very important to burn dry wood and have a chimney liner swept every 6 to 12 months depending on use. If the liner blocks, it will need to be removed and replaced, which is costly. Chimney fires are a hazard in unlined flues, but with a flue liner they are very rare and contained within the tube.

Although it is not necessarily a legal requirement to fit a flue liner for a woodburning stove, most stove installers would recommend you install one as in most cases it can be hard to determine the quality and potential performance of the chimney just by looking at it.

Can you have a chimney without a flue?

Does Your System Have a Flue? – If you have a wood-burning fire, no matter what type of appliance or fireplace it is, your system requires a flue. It may be inside a chimney or a simple flue pipe—but the flue is the duct by which smoke and waste gases exit the home.

• The duct should be sized properly to match the capacity of your fire system and smooth for optimum airflow.
• It should also be properly lined to prevent high heat and toxic fumes from escaping into the home.
• If your fire is a wood-burning one, your chimney needs a flue to work properly.
• If your home is newly acquired, you need to have your chimney inspected by a professional to ensure your flue and chimney system is safe for use.

Even if you’ve owned your home and used your system for years, if you haven’t had it inspected in the last twelve months, it’s important to schedule this appointment now,