Contents
- 1 How much does it cost to connect a cooker?
- 2 Who can fit a gas cooker?
- 3 Do you need a plumber to install a gas cooker?
- 4 Do I need an electrician to connect my cooker?
- 5 Do gas cookers need ventilation?
- 6 Do gas ovens take longer to cook than electric?
- 7 Is a gas or electric cooker cheaper to run in the UK?
How much does it cost to install a gas cooker UK?
How Much Does It Cost to Install a Gas Cooker or Hob? – The cost of installing a gas cooker or hob depends on a range of factors, such as size. There are quite a few gas cooker brands on the market, so it’s worth doing research into the differences between them before picking one to purchase. The table below breaks down the estimated costs of installing a gas cooker or hob.
| Gas Cooker Type | Estimated Supply Cost | Estimated Labour Cost | Time Required | Total Estimated Cost |
|---|---|---|---|---|
| Conventional Cooker (Single) | £200 to £500 | £150 to £300 | 1 to 2 hours | £350 to £800 |
| Conventional Cooker (Double) | £220 to £700 | £150 to £300 | 1 to 2 hours | £370 to £1,000 |
| Fan (Single) | £450 to £500 | £150 to £300 | 1 to 2 hours | £600 to £800 |
| Fan (Double) | £900 to £1,500 | £150 to £300 | 1 to 2 hours | £1,050 to £1,800 |
| Range Cooker (Single) | £500 to £650 | £150 to £300 | 1 to 2 hours | £650 to £950 |
| Range Cooker (Double) | £750 to £2,600 | £150 to £300 | 1 to 2 hours | £900 to £3,900 |
| Gas Hob | £80 to £300 | £100 to £150 | 1 to 2 hours | £180 to £450 |
To install a conventional single gas cooker, it’s estimated to cost between £350 to £800 for both the supply and labour costs. The costs of installing a conventional double single gas cooker are estimated at £370 to £1,000 for both supply and labour costs.
- Installing a single-fan gas cooker is estimated to cost between £600 to £800 for both the supply and labour costs.
- The costs of installing a double fan gas cooker are estimated to be £1,050 to £1,800 for both supply and labour costs.
- To add a single-range gas cooker it’s estimated to cost between £650 to £950 for both the supply and labour costs.
A double-range gas cooker is estimated to cost between £900 to £3,900 for both the supply and labour costs. The time required for a gas tends to be between one to two hours, but this is dependent on each installation and could take more or less time. For a gas hob, you can pick up models for as little as £80, and the total cost for supply and installation can range from £180 to £450, depending on the model you choose.
How much is it to fit a gas cooker?
Gas Cooker Installation Prices –
| Type/Width of Gas Cooker | Labour Costs | Supply Costs | Total Cost |
|---|---|---|---|
| Natural Gas Cooker | £70 to £130 | £300 to £2400 | £370 to £2530 |
| LPG Gas Cooker | £70 to £130 | £400 to £2000 | £470 to £2130 |
| 60cm Gas Cooker | £70 to £130 | £230 to £650 | £300 to £780 |
| 90cm Gas Cooker | £70 to £130 | £500 to £1200 | £570 to £1330 |
| 100cm Gas Cooker | £70 to £130 | £700 to £1600 | £770 to £1730 |
| 110cm Gas Cooker | £70 to £130 | £1300 to £2200 | £1370 to £2330 |
How much does it cost to connect a cooker?
Electric Cooker Installation Prices – The table below shows the prices you can expect to pay for various electric cooker installations. The labour costs given in this table reflect 1-2 hours or 2-3 hours based on the type of appliance being fitted.
| APPLIANCE TYPE | PRICE RANGE | LABOUR COSTS | AVERAGE TOTAL COST |
|---|---|---|---|
| Range electric cooker installation | £400-£5500 | £70-£150 | £475-£5650 |
| Freestanding cooker installation | £150-£2500 | £60-£120 | £200-£2600 |
| Solid plate hob installation | £100-£200 | £60-£120 | £150-£325 |
| Ceramic hob installation | £125-£850 | £60-£120 | £175-£975 |
| Induction hob installation | £150-£3500 | £60-£120 | £200-£3600 |
| Single electric oven installation | £100-£2150 | £60-£120 | £150-£2275 |
| Double electric oven installation | £250-£1500 | £70-£150 | £325-£1650 |
| Built under electric oven installation | £250-£1500 | £70-£150 | £325-£1650 |
| Compact electric oven installation | £350-£3000 | £70-£150 | £425-£3150 |
Who can fit a gas cooker?
How can Local Heroes help? – Finding a Gas Safe Registered engineer in your area can take several hours of research. And with many rogue traders doing gas jobs all over the country, you want to make sure you find someone reliable. We have hundreds of Gas Safe Registered engineers on our platform.
All you have to do is tell us where you are and we’ll match you with a Local Hero. After discussing the job with you, they’ll take all the necessary steps to keep you safe and install your new cooker quickly. We ask all our customers for honest feedback, so when we recommend someone, we know they’ll do the job to the highest of standards and meet the latest legal requirements.
Still need some help or got a burning question that you need answered? Contact us with your question and our expert team will be happy to respond.
Do you need a plumber to install a gas cooker?
Gas oven or hob installation – Whether your home already uses natural gas or LPG as a fuel, or you’re converting to using natural gas or LPG in your home, there are a couple of things to bear in mind when it comes to having a gas cooker or gas hob fitted.
Installation of a gas hob or oven should only be carried out by a competent qualified, registered gas engineer who is Gas Safe registered. This will ensure that your newly installed gas cooking appliance is correctly fitted and safe for use. If the old gas oven or hob needs to be removed or disconnected it’s important that this is only carried out by a suitably competent Gas Safe registered engineer.
Only a registered engineer will have the right skills to do this safely.
How long does it take to install a gas cooker?
As long as the cooker is being installed in the same position it should normally take no longer than an hour to install most cookers. Total Cost of freestanding Cooker Installation. The same advice as buying a freestanding cooker is also relevant, although less restrictions apply.
Is it easy to install a gas cooker?
What about the bayonet fitting? – Let’s say you already have a gas cooker installed and you just want to disconnect it and connect up a new cooker. The easy-fit bayonet fittings make it so simple you could do it in less than a minute. But if it is a new gas cooker (or a second-hand one) the regulations say that it must have a gas safe engineer to connect it up.
Can electricians fit gas cookers?
The Non-Electrical Side of Cooker Installation – Safely installing a cooker is about more than just managing to install electric cooker wiring correctly, of course. You will also need to make sure the cooker is physically safe in the location you intend to put it.
If your cooker is freestanding, this is a relatively straightforward task. As long as the floor underneath the cooker is strong enough and the cooker is on even footing, you should be fine. You will want to make sure the cooker cannot move around, especially if it has a gas attachment for the hobs, but other than that, you should be good to go.
If your cooker is fitted, you will need to make sure it is properly secured, and that the cabinetry around it is also properly installed. Fitted cookers are rarely the heaviest appliance in your home, but they are still heavy enough to cause some damage to property and person if they were to come crashing down out of the hole they were supposed to be secured in.
- Other things to consider here include lifting things properly.
- If you are moving a large free-standing range cooker, you should treat it as a two-person job, being sure to lift with your knees to avoid damaging your back.
- Trying to lift it yourself could result in injury, and shuffling it along the floor could damage your floor.
This is less of a concern for smaller, lighter fitted cookers, but you will know your own limitations. If you are struggling to lift the cooker, get help, don’t injure yourself by trying to do too much. Many free-standing electric cookers have gas hobs.
- Now, it should go without saying that any gas connections will need to be taken care of by a registered gas safe plumber,
- It is illegal to start messing with gas pipes yourself (unless you are qualified) but beyond that, the risks are simply too great.
- Leaking gas could cause breathing problems and, of course, explosions.
The exception to this rule is if you are temporarily removing an already professionally installed cooker that has a bayonet fitting. These fittings are self-sealing and simply twist and pull out. They are designed to allow unqualified persons to temporarily disconnect their cooker for things like cleaning, but anything beyond disconnecting or reconnecting that bayonet fitting will need a qualified professional.
- The amount of professional help required to safely install an electric cooker is largely down to the type of cooker.
- A large free-standing cooker with all the trimmings and a gas hob will need both the help of a qualified electrician and a gas-safe plumber,
- On the other hand, a small fitted oven that is rated under 3kW and has no gas components can be fitted entirely by you with no professional help needed.
That being said, if you are at all unsure about the process, don’t hesitate to get help. It is far better to be safe than sorry when dealing with large electrical appliances.
What is the average life of a gas cooker?
Your cooker, unfortunately, is like many other things in life, it’s not built to last forever. Unless you’ve discovered an immortal, ever-lasting oven, chances are you’re going to have to replace either the oven itself or some of its parts at one time or another. But how long do cookers last? Read on to learn some of the things that you can do to prolong the life of your cooking appliance. Modern cookers are designed to last as long as possible, especially those that offer the highest of specifications, but there will always come a day when it just seems to have given up. This may happen after many years, or soon after purchase, but it is always important to be aware that where electronics, heat and moving parts are present, there is the potential for something to go wrong. Like anything, if you don’t properly care and look after your cooker, it’s not going to work. Therefore it is vital to thoroughly clean your oven as regularly as possible to prevent grease and other detritus from building up and causing damage. If dealt with and removed early enough, your oven is far less likely to exhibit issues with functionality further down the line. A good scrub and clean not only improves the overall health of your cooker, but it also benefits hygiene. So, there will be far fewer chances of unusual tastes when eating your food! If getting dirty while on your hands and knees to keep your cooker alive doesn’t sound very appealing, then there is always the possibility of taking your oven in for a service. Most cooker manufactures will provide this as standard when you purchase your cooker, as well as any repairs that are covered under warranty. This, however, will ensure that if there are any parts such as fans or filters that need replacing, they can be found and dealt with as soon as possible. One of the most common signs to look out for to tell if your cooker is on the way out is when getting up to the required temperature takes longer than usual. This could indicate one of two things; either there is an issue with your cooker’s seals or there are deeper issues with the heating element, indicating an irreversible decline in your oven’s performance. You cooker, to some extent, may still work, but continuing to cook in this state may lead to more costlier issues in the future. So, what’s better than cure? Prevention. Which is why it’s extremely important to take note and practice the things talked about above. Regularly cleaning and replacing faulty parts will on average keep your cooker working for around 10-15 years, depending on the type and model. So, it is definitely worth taking that extra bit of time out every now and then to properly care for your oven! If your oven is experiencing issues and you believe it to be due to faulty or damaged parts, then there is no reason to go out and buy a whole new oven, go ahead and get those parts replaced! We supply a wide range of like-for-like or high-quality alternatives here at Cooker Spare Parts for popular cooker brands such as Hotpoint, Belling and much more. To view our full list of manufacturers, simply click the button below – for further information on our range of spare cooker parts, please do not hesitate to contact us today. View Full List of Manufacturers >
Can I connect a gas cooker myself?
The simple answer is no. You must only ever work with a qualified gas engineer. When looking for an engineer, always make sure they are a Gas Safe engineer.
Do I need an electrician to connect my cooker?
Electrical Regulations and What They Mean for You – Let us start by saying that if your new cooker model is more powerful than what you previously owned, chances are that you will need to install a new circuit in order to power the appliance. However, cooker circuit installation can only be done by a Part P certified electrician ! With that said, if you are able to use your current circuit and cooker control unit, then you are free to wire your new purchase, but you need to know what you are doing as this procedure can be fatal if you are not careful,
How much does it cost to remove and install a new oven?
Oven Installation Costs
| Item | Cost |
|---|---|
| Installation labor | $150-$250 |
| Additional materials and supplies | $50-$100 |
| Old appliance removal/Disposal | $40-$120 |
| Total cost | $1,240-$2,270 |
Is it cheaper to use a gas cooker?
Benefits of a gas cooker –
- Gas cookers provide immediately responsive heat and can be easily controlled with dials. As the flame increases or decreases the heat itself is directly changed in correlation.
- Simmering and boiling on a gas hob is quick and easy. Gas ring burners provide even heat distribution; combined with responsive temperature changes, it allows for greater control when cooking with pots and pans.
- Gas is also a much cheaper and efficient fuel than electric, and the cost of running a gas cooker over the course of a year is always cheaper than electric.
Can anyone connect a gas oven?
Q: I just moved into a new house and want to convert my electric appliances to gas. Who installs gas lines for stoves? Is this a job I can do myself? – A: Moving into a new home is an exciting time. The new homeowner can make their house feel more like their own by painting the walls, putting up artwork, or installing new appliances.
However, a new gas line installation is a home improvement that’s best not to DIY unless you are a licensed, bonded, and insured professional. When you need to know who installs gas lines for stoves, the best bet is to contact a licensed plumber. If you don’t already know a certified plumber whose work you can vouch for, you can try to get recommendations online or from neighbors and get a few quotes before signing any kind of contract.
Then it’s best to check with the local gas installation service to ensure you’re taking the proper steps for your safety and the safety of your home. This will probably include an application for service, permits, and a final inspection. If the new gas line goes out to the street, you may also need to enlist the help of a landscaper or masonry service to repair any torn-up grass or concrete. +
Do gas cookers need ventilation?
Why do gas fires require a flue but gas cookers normally vent their combustion products inside the building? | Notes and Queries | guardian.co.uk Why do gas fires require a flue but gas cookers normally vent their combustion products inside the building?
ALL gas-burning appliances need an adequate supply of fresh air to burn properly, and all produce a small amount of the toxic carbon monoxide gas in the combustion products. If the air supply is restricted, the quantity of carbon monoxide produced rises sharply. The smallest sizes of gas-burning appliances, when burning in a normal room, obtain enough air from gaps around doors, windows, and between floorboards, etc. Appliances rated at 7 kW and above need a fixed air vent and flue to work properly. An exception is made for cookers. This is partly because it would be impractical to fit an effective flue, but also because it is reasonable to assume that people do not leave all the burners on full power for any extended period. It is potentially lethal to use your cooker as a gas fire, with the rings on full for an hour or more and the doors and windows closed. Deaths caused by carbon monoxide poisoning from faulty gas installations occur every winter, but I know of none from a cooker in a house.A. Tyldesley, Ormskirk, Lancs.
: Why do gas fires require a flue but gas cookers normally vent their combustion products inside the building? | Notes and Queries | guardian.co.uk
Can I disconnect gas cooker myself?
You need to hire a professional Gas Safe Engineer to disconnect a gas cooker permanently. But, as per 1998 gas safety regulations, you can temporally. Most people prefer to use a free-standing gas cooker with eye-level grill.
Do new cookers come with gas pipe?
All new gas cookers don’t come supplied with the gas certified flexible hose that will be required to attach to your gas supply and allow you to use it.
Should I install gas stove myself?
Photo 6: Check for leaks – Turn on the gas cock (vertical position) and light the range burners for about a minute to get the air out of the gas line. Then spray all the joints you’ve made with gas leak detector (sold at home centers). You can also use warm, thick soapy water for this.
- Bubbles around a joint will indicate a leak.
- Hooking up a gas range or water heater is a relatively simple job requiring just basic tools and readily available supplies.
- And if you use the right materials and follow instructions carefully, you can safely do the job yourself.
- A professional may charge as much as a few hundred dollars for a hook-up.
We’ll show you in this article how to do two basic types of gas connection: hooking up a gas range using a flexible, corrugated connector (a gas clothes dryer is similar); and using threaded black steel gas pipe to hook up a water heater. Flexible corrugated gas connectors and gas pipe and fittings (black) are available at most home centers and well-stocked hardware stores.
- Stainless steel or coated brass connectors are the only type of flexible connectors sold these days, and the only type you can safely and legally use.
- Older types of corrugated connectors—sold until the 1980s—made of uncoated brass or other metal have been found to be unsafe.
- Have one in your house? Replace it now! The most important step to a safe installation is to buy the right connector.
Here’s what to look for:
Buy a connector that is clearly marked for the appliance you’re hooking up—either “range” or “dryer.” Typically the corrugated tube of a range connector is 1/2 in. dia.i.d. (inside diameter), and a dryer connector is 3/8 in. dia.i.d. These dimensions are not always marked on the package, but they will be marked for either range or dryer. Buy a connector that comes packaged with the end connector fittings you need (see Photo 3). Usually the gas line coming into your kitchen will be 1/2-in. black threaded pipe, and the connection to the stove will be either a male (external threads) or female (internal threads) 1/2-in. fitting. If you cannot find a connector package with end fittings that match what you need for the gas line, use a black gas pipe fitting on the line to accommodate the end connector fitting. For example, in Photos 2 and 3, we show a 1/2-in. x 3/4-in. coupling on the gas line to accommodate the 3/4-in. end connector fitting. (For more possible connections and information about connecting to soft copper supply lines, see How to Connect Gas Pipe Lines ) Use a connector that’s plenty long so you’ll have enough room to work between the gas stove and the wall. They come in lengths from 24 in. to 60 in. Don’t reuse a flexible connector; if you get a new appliance, buy a new connector as well. Follow the instructions for installing the connector religiously. Our Photos 1 through 5 give a real-life picture of how this is done. Here are some additional guidelines: Be careful not to kink or force the corrugated connector into sharp bends, which could eventually cause a break. Always check your work for leaks (Photo 6). Gas leak detectors are sold at home centers, hardware stores and online. Although it’s not always required to have a range hookup inspected,we strongly recommend that you call your local gas company or plumbing inspector to check your work.
Why does my gas cooker take so long to cook?
Faulty Gas Safety Valve –
Your gas oven may be heating slowly due to a broken gas safety valve. If the gas safety valve is getting stuck or not opening up properly, this could lead to your cooker heating slowly and even getting too hot. This is a more serious issue than the aforementioned problems and you should call a professional or your gas company right away if you smell any gas near your cooker.
Do gas ovens take longer to cook than electric?
Benefits of an Electric Oven – While gas may have the edge in terms of heating speed, electric does tend to offer a quicker cooking experience. Electric ovens tend to distribute heat more evenly, particularly fan-assisted ovens. This allows the hot air to be circulated around the oven, surrounding the item and cooking the food from multiple angles.
Can I connect my own gas cooker UK?
In fact, it’s illegal and extremely dangerous if you try to do it yourself. The law requires you to use a Gas Safe engineer. You will need to speak to a professional rather than attempting to do the work yourself.
How much does it cost to connect gas to a property UK?
The Checkatrade guarantee
| Gas installation cost | Average cost |
|---|---|
| Install new gas connection to mains supply | £1,500 |
| Cap a gas pipe | £500 |
| Install new gas central heating system (excluding labour) | £4,600 |
| Gas engineer hourly rate | £30-£40 |
Do you need a professional to install a cooker?
The Non-Electrical Side of Cooker Installation – Safely installing a cooker is about more than just managing to install electric cooker wiring correctly, of course. You will also need to make sure the cooker is physically safe in the location you intend to put it.
- If your cooker is freestanding, this is a relatively straightforward task.
- As long as the floor underneath the cooker is strong enough and the cooker is on even footing, you should be fine.
- You will want to make sure the cooker cannot move around, especially if it has a gas attachment for the hobs, but other than that, you should be good to go.
If your cooker is fitted, you will need to make sure it is properly secured, and that the cabinetry around it is also properly installed. Fitted cookers are rarely the heaviest appliance in your home, but they are still heavy enough to cause some damage to property and person if they were to come crashing down out of the hole they were supposed to be secured in.
- Other things to consider here include lifting things properly.
- If you are moving a large free-standing range cooker, you should treat it as a two-person job, being sure to lift with your knees to avoid damaging your back.
- Trying to lift it yourself could result in injury, and shuffling it along the floor could damage your floor.
This is less of a concern for smaller, lighter fitted cookers, but you will know your own limitations. If you are struggling to lift the cooker, get help, don’t injure yourself by trying to do too much. Many free-standing electric cookers have gas hobs.
Now, it should go without saying that any gas connections will need to be taken care of by a registered gas safe plumber, It is illegal to start messing with gas pipes yourself (unless you are qualified) but beyond that, the risks are simply too great. Leaking gas could cause breathing problems and, of course, explosions.
The exception to this rule is if you are temporarily removing an already professionally installed cooker that has a bayonet fitting. These fittings are self-sealing and simply twist and pull out. They are designed to allow unqualified persons to temporarily disconnect their cooker for things like cleaning, but anything beyond disconnecting or reconnecting that bayonet fitting will need a qualified professional.
The amount of professional help required to safely install an electric cooker is largely down to the type of cooker. A large free-standing cooker with all the trimmings and a gas hob will need both the help of a qualified electrician and a gas-safe plumber, On the other hand, a small fitted oven that is rated under 3kW and has no gas components can be fitted entirely by you with no professional help needed.
That being said, if you are at all unsure about the process, don’t hesitate to get help. It is far better to be safe than sorry when dealing with large electrical appliances.
Is a gas or electric cooker cheaper to run in the UK?
Electric ovens – There is no doubt that gas ovens are brilliant tools, but many of us prefer electric. Electric ovens are typically a bit cheaper to install, and the initial cost is often cheaper than a gas oven. They also cook with dry heat, so they are much better for baking and roasting (although many gas fans will argue this case). 
Most electric ovens also have fans nowadays, so the temperature in the oven is much more stable and consistent and food cooks more evenly. Electric hobs are also much easier to clean than gas hobs. Of course, electric ovens do heat up a lot slower than gas ovens.
